Aquatemp Digital Thermometer

The AquaTemp waterproof thermometers are housed in a unique, robust waterproof cases offering IP66 and IP67 protection. The AquaTemp utilises tried and tested electronic circuitry, designed for reliability and ease of use in routine day-to-day applications.

 

The thermometers incorporate a clear digital display with a precise readout of temperature over the range of -49.9 to +199.9°C or -50 to +300°C and a 0.1°C or 1°C resolution. Both probe open circuit and low battery are displayed, when applicable. The AquaTemp incorporates a push button audible on/off switch and is powered by a 12 volt MN21 alkaline battery with a minimum life expectancy of up to 100 hours. The AquaTemp's auto-power off facility automatically turns the instrument off after four minutes, maximising battery life.

Catertemp Digital Thermometer

The CaterTemp 2 and 5 digital thermometers are designed with the catering and food processing industry in mind. Housed in a robust ABS case, the CaterTemp thermometers are a combination of proven circuitry and durability.
 

The CaterTemp 2 and 5 measure temperature over the range of -49.9 to +199.9°C with a resolution of 0.1°C (CaterTemp 2) or -50 to +300°C with a resolution of 1°C (CaterTemp 5). Both instruments feature a bright, easy to read LCD, displaying open circuit and low battery indication, when applicable. The CaterTemps are powered by a 9 volt battery which gives the thermometers approximately 200 hours continuous use.

 

Each CaterTemp thermometer is supplied with a permanently attached food penetration probe with 130mm pointed stainless steel stem and one metre coiled PVC lead.

CaterTemp Plus Digital Thermometer The CaterTemp Plus hand held thermometers are housed in robust ABS water resistant cases offering IP65 protection and combine advanced electronic circuitry with improved durability, designed for reliability and ease of use in day-to-day catering and food processing applications.   The instrument features a large, easy to read, LCD display with open circuit and low battery indication. The unit incorporates a simple to use on/off switch and is powered by a 9 volt battery which gives the thermometers approximately 200 hours continuous use.   The easy to clean on/off buttons are conveniently located at the front of the instrument as is the display hold facility. The CaterTemp Plus thermometers incorporate an easy to access battery compartment with a secure, water resistant cover.   The CaterTemp Plus 2 measures temperature over the range of -49.9 to +199.9°C with a 0.1°C resolution, whilst the CaterTemp Plus 5 measures temperature over the range of -50 to +300°C with a 1°C resolution.   Each CaterTemp Plus thermometer is supplied with a permanently attached, water resistant, hand held, food penetration probe with a Ø3.3 x 130mm pointed stainless steel stem and one metre PVC coiled lead.

Combo Digital Infrared  & Penetration Thermometer

The Combo is two instruments in one - a digital non-contact infrared thermometer with a foldaway food penetration probe, combined in one compact, pocket-sized unit.

Simply aim the infrared thermometer at the target and press the measurement button to display the surface temperature. The Combo non-contact infrared thermometer indicates temperature over the range of -32.9 to +219.9°C with a resolution of 0.1°C.

The distance to target ratio 3:1 therefore the thermometer should be positioned as close as possible without the need to touch the surface being measured.

The Combo thermometer incorporates maximum, minimum and lock (continuous) functions and is switchable between °C and °F. The unit is supplied with a default emissivity of 0.95, however the emissivity can be changed from 0.01 to 1. The infrared thermometer is ideal for taking surface temperature, alternatively, it is possible to take core temperature using the pointed, stainless steel, penetration probe (Ø3.3 x 120mm) that conveniently folds away into the side of the instrument when not in use.

DM 600 Digital Thermometer

The DM600 series of battery powered indicators accepts either a RTD sensor or a thermocouple sensor, depending upon the model, and displays the temperature on a 4 digit LCD display.

The sensor type is selected from a simple to use menu system which is navigated by the use of three push-button keys located on the rear of the display. The entire assembly is sealed into a cap that fits directly onto the SCH4 series of connecting heads. Alternatively suitable mounting kits are offered to enable it to fit into other sensor connecting heads if needed.

Battery Powered
4 Digit Display
Pt100 or T/C Input
Choice Of Housing
Sealed Construction

DM540 Digital Thermometer

DM540 is a battery-powered Digital Thermometer which indicates the temperature with a selectable update rate and stores the maximum and minimum readings for later recall.

The thermometer operates from standard "AA" alkaline batteries for over 2 years at the 12 second update rate.

A selection of compatible temperature sensors can be manufacturered to suit requirements with various immersion lengths and process connections.

20 mm LCD Display
Max/Min Logging
Pt100 Temperature SensorStainless Steel Case
(100 mm diameter)
IP65 Enclosure

EcoTemp Digital Thermometer

The easy to use EcoTemp digital thermometer features a large, easy to read LCD display with display hold and max/min memory functions. The unit measures temperature over the range of -49.9 to +199.9°C with a resolution of 0.1°C or 0.1°F. Both open circuit and low battery indication are displayed, when applicable.

 

To operate the max/min memory function, simply press the max/min button to display the maximum reading and a max symbol will flash in the display. Press the max/min button again to display the minimum reading and a min symbol will flash in the display. Press max/min button again to return to the normal reading. To clear the max/min temperature memory, press the max/min and on/off button simultaneously.

 

Each thermometer is supplied complete with a detachable, rigid, pointed, stainless steel penetration probe (Ø3.3 x 120mm) with a 750mm PVC connecting lead, protective probe cover, battery and instruction card.

Available with audio alarm if required.

Food Check Digital Thermometer

The Food Check digital thermometers are general purpose instruments designed specifically for use in the food and catering industry. The Food Check thermometers are ideal for measuring the temperature of liquids and semi-solids quickly and accurately.

The instrument features a large, easy to read, LCD display with open circuit and low battery indication. The unit incorporates a simple to use on/off switch and is powered by a 9 volt battery which gives the thermometers approximately 200 hours continuous use.

The Food Check 2 measures temperature over the range of -49.9 to +149.9°C with a resolution of 0.1°C and the Food Check 5 measures temperature over the range of -30 to +300°C with a resolution of 1°C. Each Food Check thermometer is supplied with a permanently attached food penetration probe with 130mm pointed stainless steel stem and 500mm PVC connecting lead.

RayTemp 3 Infrared Thermometer

The RayTemp 3 infrared thermometer is compact, lightweight and easy to use. Simply aim, pull the trigger and display the temperature of the item being measured, in addition the LCD will display the maximum temperature. The RayTemp 3 measures temperature over the range of -60 to +500°C with an assured accuracy of ±2%/±2°C of reading in an ambient temperature of between +15°C and +25°C, with a repeatability of ±1°C of reading.

The RayTemp 3 is ideal for measuring food temperatures, eliminating the need to touch or contaminate the food you are measuring, avoiding the risk of cross-contamination. It can be used by anyone as there is no need to focus or calibrate the instrument.

Each RayTemp 3 features a single push button, allowing the user to select °C or °F. The thermometer also incorporates laser assisted alignment as standard, to assist in pin-pointing the area of measurement. The unit incorporates an 11:1 optic ratio (target distance/diameter ratio) and a fixed emissivity of 0.97. An optional protective pouch is available.

ThermaCheck Digital Thermometer

The ThermaCheck thermistor thermometer has been specifically designed for use in the food and catering industry to cope with routine day-to-day usage.

The ThermaCheck measures temperature over the range of -39.9 to +109.9°C with a resolution of 0.1°C and a high system accuracy of ±0.4°C (-10°C to +70°C).

The instrument features a large, easy to read, LCD display with open circuit and low battery indication. The ThermaCheck is powered by a 9 volt battery which gives the thermometer approximately 100 hours continuous use. The unit also incorporates an auto-power off facility which maximises battery life, turning the instrument off automatically after five minutes.

The ThermaCheck thermometer is supplied with a permanently attached general purpose, food penetration probe with 130mm pointed, stainless steel stem and a one metre coiled PVC lead.

ThermaLite Digital Thermometer

The ThermaLite digital thermometer is a truly pocket size thermometer measuring less than 185mm overall and weighing less than 50 grams including battery, probe and cover. Despite its modest size, the ThermaLite digital pocket thermometer incorporates a clear LCD display. The thermometer displays temperature over the range of -49.9 to +149.9°C with a 0.1°C resolution and an accuracy of better than ±1°C.

The instrument incorporates a simple, push button, on/off switch and an auto power off facility that turns the instrument off automatically after 10 minutes, maximising battery life. The ThermaLite digital is powered by a 3 volt lithium coin cell with a minimum life expectancy of up to 5,000 hours continuous use.

The ThermaLite digital thermometer casing is manufactured from high impact ABS plastic, designed to cope with routine day-to-day food and catering applications. The unit incorporates a pointed Ø3.3 x 44mm stainless steel, penetration probe for measuring the temperature of food and semi-solid materials.

 

The ThermaLite digital thermometer fits easily and conveniently into the pocket. Each ThermaLite digital thermometer is supplied with a protective probe cover and wall bracket.

Thermamite Digital Thermometer

The Thermamite thermometers offer the accuracy, flexibility and ease of use, coupled with the reliability that is required by the food and catering industry in helping to meet today's food hygiene legislation. Both Thermamite thermometers incorporate a clear LCD digital display with a precise read-out of temperature over the range of -49.9 to +199.9°C or  -30 to +300°C and a 0.1°C or 1°C resolution. Low battery and open circuit indication are also displayed, when applicable.

The Thermamite is powered by a standard 9 volt PP3 battery with a minimum life expectancy of up to 500 hours. Each thermometer is supplied with a permanently attached rigid pointed, stainless steel food penetration probe (Ø3.3 x 108mm) and 500mm connecting lead, battery and instruction card.

The Thermamite thermometers are also available in a variety of colour-coded cases: blue, white, yellow, green, red, brown and black.

Thermapen 1 & 5 Pocket Thermometer

The Thermapen pocket thermometers utilise tried and tested electronic circuitry, designed for reliability and ease of use in the food and catering industry. The thermometers incorporate a clear digital display with a precise read-out of temperature over the range of -49.9 to +199.9°C or -50 to +300°C and a 0.1°C or 1°C resolution. Both "Low Battery" and "Open Circuit" indication are also displayed when applicable.

 

Styled to fit into the palm of the hand, the Thermapen pocket thermometers incorporate a rigid, pointed, stainless steel food penetration probe which conveniently folds back through 180 degrees into the side of the instrument when not in use. The Thermapen is lightweight, at less than 100 grams including battery and probe. The casing is manufactured from high impact ABS plastic designed to cope with routine day-to-day food and catering applications.

 

An auto-power on/off facility turns the instrument on when the probe is in use and automatically off after five minutes, which maximises battery life. The Thermapen is powered by a standard 12 volt MN21 alkaline battery with a minimum life expectancy of up to 150 hours continuous use.

TN1 Infrared Thermometer The TN1 is a non-contact infrared thermometer, simply aim the thermometer at the target and press the measurement button to display the surface temperature. The TN1 indicates temperature over the range of -33 to +220°C with a resolution of 0.1°C. The distance to target ratio is 1:1 therefore the thermometer should be positioned as close to the target as possible. The TN1 incorporates max, min and lock (continuous) functions and is °C and °F switchable. The unit is supplied with a default emissivity of 0.95 the emissivity can be changed from 0.01 to 1.

TN2 Non-Contact Infrared Thermometer with Laser

The TN2 is possibly the smallest non-contact infrared thermometer with laser alignment on the market today. Simply aim the thermometer at the target and press the read button to display the surface temperature. The TN2 indicates temperature over the range of -33 to +250°C with a resolution of 0.1°C.

The distance to target ratio is 3:1 therefore the thermometer should be positioned as close to the target as practical. The TN2 infrared thermometer incorporates maximum, minimum and lock (continuous) functions and is switchable between °C and °F. The unit is supplied with a default emissivity of 0.95, however, the emissivity can be changed from 0.01 to 1.