610 / 615 Pressure / Electrical Calibrators

These self-contained, battery powered packages contain a pressure generator, fine pressure control, device energising (not IS version) and output measurement capabilities, as well as facilities for 4 to 20 mA loop testing and data storage.

The rugged weatherproof design is styled such that the pressure pump can be operated and test leads connected without compromising the visibility of the large dual parameter display. The mA step and ramp outputs and a built-in continuity tester extend the capabilities to include the commissioning and maintenance of control loops.

52 Ranges from 2.5 mbar to 700 bar

Accuracy from 0.025% F.S.

Integral combined pressure/vacuum pump

4 to 20 mA loop test facility

RS 232 interface and fully documenting version

Intrinsically safe version

Up to 11 sensors per instrument

DPI 320 Pressure / Electrical Calibrator

This range of portable calibrators is designed to make testing and calibration of high pressure instruments and systems both quick and simple. Two versions are available, the DPI 320 which is the standard model and the DPI 325 which supports real time error analysis and has full documenting capability.

High accuracy 0.025% FS

Generates pneumatic pressures to 200 bar

Dual channel readout: pressure and electrical

Self contained rechargeable gas cylinder

RS 232 interface and documenting versions

Up to 11 sensors per instrument

DPI 603 Pressure Calibrator

The cost effective DPI 603, which extends the Druck range of rugged portable battery powered pressure calibrators, has standard ranges of -1 to +1 bar, 2 bar, 10 bar or 20 bar gauge with an accuracy of ±0.075%.

Accuracy ±0.075% standard

Integral pressure/vacuum generation

Standard ranges up to 20 barg

5 digit LCD display, multiple scales

Dual pressure and electrical readout

Transmitter supply and measurement

Loop verification test current

DPI 605 Pressure / Electrical Calibrator

The DPI 605 precision pressure calibrator which combines Druck’s expertise in micromachined integrated strain gauge and vibrating silicon pressure sensors, microprocessor technology and ergonomic styling, has an accuracy of 0.025% of reading. It is a portable battery powered instrument with an electrical measurement and supply capability providing simultaneous pressure and electrical displays, data storage and an RS 232 interface.

Range -1 to +20 bar gauge

Accuracy ±0.025% of reading

ISO 9000 systems compatible

Storage of test results

Internal pressure/vacuum generation

Energising outputs for sensors

RS 232 digital interface

Temperature measurement to 200°C

DPI 811 / 812 RTD / Loop Calibrator

The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.

Measure and source RTDs

2, 3 and 4 wire auto detection

Temperature test and maintenance

Transmitter calibration

Loop set-up and diagnostics

Switch verification

MC2 Pressure Calibrator

MC2 Pressure Calibrator is the new must-have tool from Beamex for pressure calibration. It is a compact hand-held calibrator with calibration capabilities for pressure and electrical signals. Being a Beamex calibrator, MC2 represents the high, uncompromised quality standards evident in other Beamex calibration equipment.

MC2 features:
• Pressure and electrical calibrator
• Internal / external pressure modules
• Compact size and design
• User-friendly

MC3 Portable Multifunction Calibrator

MC3 calibrator is a portable "mid-range" calibrator which can be ordered in three different configurations. MC3 is based on the advanced Beamex MC5 technology, thus offering an IP65 calibrator with the internal boards mounted on shock absorbers to withstand shocks.

The available configurations for the MC3 are MC3^PE which has pressure and electrical functions, the MC3^TE which has temperature and electrical functions and the MC3^MF, which is a Multifunction Calibrator with pressure, temperature and electrical functions.

The MC3 calibrator can be configured and supplied as 3 different models:

MC3TE: Temperature / Electrical Calibrator
MC3PE: Pressure / Electrical Calibrator
MC3MF: Multifunction Calibrator

	General
	Display	96 x 72 mm (3.78" x 2.83"), 320 x 240 pixels, back lit LCD
	Weight	1.7 - 2.3 kg (3.7 - 5.1 lbs)
	Dimensions	245 mm (9.6") x 192 mm (7.5") x 74 mm (2.9") (d/w/h)
	Case protection	IP65 (dust and water proof)
	Keyboard	Membrane protected individual keys
	Battery type	Rechargeable NiMH, 4000 mAh, 7.2V DC
	Battery operation	Average 10 hours
	Charger supply	100...240 VAC, 50-60 Hz
	Operating temperature	-10...50°C (14...122°F)
	Specifications valid	15...35°C (59...95°F)
	Temperature coefficient	< ±0.001% RDG / °C outside of 15...35°C (59...95°F)
	Storage temperature	-20 to 60°C (-4 to 140°F)
	Warranty	2 years

 

Module	Function	Range	Uncertainty
INT	Internal Pressure Modules	-1bar (-14.5 psi) to 20bar (300 psi)	0.05 % FS
E	V measurement	± 50 V	0.02 % RDG + 0.5 mV
E	mA measurement	± 100 mA	0.02 % RDG + 2 µA
E	mA generation	0 … 25 mA	0.02 % RDG + 2 µA
E	Hz measurement	0.0028 … 50000 Hz	0.02 % RDG
E	Pulse counting	0 … 9 999 999 pulses	N/A
ET	V generation	± 12 V	0.02 % RDG + 0.2 mV
ET	mA generation	± 25 mA	0.02 % RDG + 2 µA
ET	Hz generation	0.00028 … 50000 Hz	0.02 % RDG
ET	Pulse generation	0 … 9 999 999 pulses	N/A
ET	mV generation / measurement	± 500 mV	0.02 % RDG + 8 µV
ET	Ohm measurement / simulation	0 … 4000 ohm / 1 … 4000 ohm	From 0.02 % RDG + 7 mohm
ET	T/C measurement / simulation	B, E, J, K, N, R, S, T, U, L, C, G, D	From 0.2 °C
ET	RTD measurement / simulation	Pt100 (385) + 13 other types	From 0.2 °C
RJ	T/C reference junction compensation	-10 … 50 °C	0.2 °C

Specifications are subject to change without notice. For detailed technical specifications please see MC3 Technical Data Sheet

MC5 Multifunction Calibrator

MC5 is the first of its kind documenting modular ALL-IN-ONE multifunction calibrator. Within its compact and ergonomic case, MC5 provides calibration capability for pressure, temperature, electrical and frequency signals (including pulses). Therefore, MC5 offers calibration capability for virtually all types of process and other instruments.

An I.S. version is also available.

.

Module	Function	Range	Uncertainty
INT	Internal Pressure Modules	-1bar (-14.5 psi) to 160bar (2400 psi)	From 0.025 % RDG + 0.01% FS
EXT	External Pressure Modules	Up to 1000 bar (15000 psi)	From 0.04 % RDG + 0.01% FS
E	mV measurement	± 1000 mV	0.02 % RDG + 5 µV
E	V measurement	± 50 V	0.02 % RDG + 0.25 mV
E	mA measurement	± 100 mA	0.02 % RDG + 1.5 µA
E	mA generation	0 … 25 mA	0.02 % RDG + 1.5 µA
E	Hz measurement	0.0028 … 50000 Hz	0.01 % RDG
E	Pulse counting	0 … 9 999 999 pulses	N/A
ET	V generation	± 12 V	0.02 % RDG + 0.1 mV
ET	mA generation	± 25 mA	0.02 % RDG + 1 µA
ET	Hz generation	0.00028 … 50000 Hz	0.01 % RDG
ET	Pulse generation	0 … 9 999 999 pulses	N/A
ET	mV generation / measurement	± 500 mV	0.02 % RDG + 4 µV
ET	Ohm measurement / simulation	0 … 4000 ohm / 1 … 4000 ohm	From 0.02 % RDG + 3.5 mohm
ET	T/C measurement / simulation	B, E, J, K, N, R, S, T, U, L, C, G, D	From 0.02 % RDG + 0.1 °C
ET	RTD measurement / simulation	Pt100 (385) + 13 other types	From 0.025 % RDG + 0.06°C
RJ	T/C reference junction compensation	-10 … 50 °C	0.1 °C

Model DPG5 II Digital Piston Gauge

The DPG5 is built around an original concept first introduced by Desgranges & Huot in the early 80's and which combines the metrological performance of pressure balance with the convenience of digital instrumentation.
It is specifically designed for the calibration of last generation electronic pressure measuring devices such as automatic controllers, pressure calibrators, transmitters and sensors.

Combined with DH-Budenberg automated pressure controller type GPC2 & "Pascal" software DPG5 provides a straight forward, cost effective, turn key solution to pressure calibration automation problems.

DPG5 features

- Accuracy 15 ppm over 3 years
- Self-calibrating
- Integrated Environment Monitoring Module
- 16 ranges from –50 hPa to 25 MPa (-0,7 psi to 3,625 psi)
- Operates in gauge and absolute pressure
- Resolution to 0.1 Pa (0.0004 iwc)
- Accredited calibration certificate as standard

Multi-Type Thermometer Calibrator

Source and measure 8 thermocouple type J, K, T, E, C, R, S, and N

• One model for multiple thermocouple types with precision output displayed as mV or °C/°F
• Microprocessor assures maximum accuracy to 0.15% of reading over wide ranges
• High Accuracy Calibration function simulates precision thermocouple outputs for use in calibrating thermometers, transmitters,controllers or recorders.
• Model 433201 for 115V and Model 433202 for 220V

PPS40 series Portable Pressure Calibrator

The PPS40 family of portable calibrators are a powerful range of instruments providing optimum feature combination for industrial users, whilst being user friendly and rugged enough for the harshest environments. Housed in a robust enclosure offering IP65 protection and excellent ergonomics, the calibrator combines the measurement of pressures at an accuracy of 0.025%, including temperature correction for operating between 0 and 40°C (32 to 104°F), with supply and measurement of transmitter or transducer output, temperature measurement and data storage.

• Built-in pumps with fine control for pressure/vacuum
• Robust IP65 ABS enclosure
• Easy to use menu system
• Simultaneous display of all measurement data
• Ranges up to 40 MPa (5,800 psi) oil and water (hydraulic).
• Ranges from -0.1 to 2 MPa (-14.5 to 290 psi) pneumatic (gas).
• 0.025% accuracy across range 0 to 40°C (32 to 104°F)
• Powers, reads and stores data from test instrument
• Supplied with PC software
• Re-chargeable batteries, supplied with charger

Precision Multifunction Calibrator

Accurate calibration source for Thermocouple, mA, mV, V and
Frequency devices

• Source DC Current ranges with
  high 0.001mA resolution
• Self-contained 24V loop power supply drives current loads up to 1000O
• User can set output steps from 1% to 100%
• Large 5 digit LCD
• Automatic ramp output
• Beeps if load is open with Current (mA) output or shorted with Voltage output

Process Calibrator MultiMeter™

Precision DC, mA, Voltage, Frequency Calibrator combined with True RMS MultiMeter

• Simultaneous source/simulate and measure on large dual display
• Constant current output for loads up to 1200O
• Bipolar current (±25mA) and voltage (±1.5V, ±15V) outputs
• Measure DCmA, ACmA, DCV, ACV, AC+DC, Temperature, Frequency, Duty Cycle, Pulse Width, Resistance, Continuity, and Diode
• True RMS measurement for non-linear voltage and current loads

Type K Thermometer Calibrator

Source and measure with course and fine adjustments

• Large backlit LCD display for viewing in dimly lit areas
• Measurement mode: Single or Dual input
• Data Hold and Max for measurement functions
• Source mode: Simply select output values using rotary switch with Coarse and Fine adjustments